Browsing CSEM Archive by Research Areas "Other"
Now showing items 1-20 of 57
-
3D Printed Antennas for MM-Wave sensing applications
(2016-09-03)In this paper, three low cost 3D printed antenna concepts for integration with a mm-wave miniature platform are presented. Proposed antenna solutions are optimized to operate in mm-wave ISM band (122GHz-123GHz). Different ... -
A real-time optimal inverse planning for Gamma Knife radiosurgery by convex optimization: description of the system and first dosimetry data
(2018)OBJECTIVE The authors developed a new, real-time interactive inverse planning approach, based on a fully convex framework, to be used for Gamma Knife radiosurgery. METHODS The convex framework is based on the precomputation ... -
A simple one-pot Adams method route to conductive high surface area IrO2-TiO2 materials
(2016)Iridium titanium oxide materials were prepared using a simple one-pot method by reacting inorganic metal precursors with sodium nitrate at 350 degrees C (Adams method). HAADF-STEM images and XRD studies indicate a mixture ... -
Annual Report
(2018)Technologies in demand, increased industrial cooperation, and a well-stocked project portfolio: On paper, all the lights are green for CSEM. -
Annual Report
(2017)CSEM recorded an encouraging increase in its industrial activity. The financial year was marked by several prestigious distinctions. -
Annual Report
(2014)With growth of ≈8% in the volume of projects and the appointment of three industry partners to its board, CSEM reported a successful 30th anniversary year. -
Annual Report
(2015)Strong growth in industrial projects in such varied domains as the IoT, wearable technology, solar energy, and the fight against counterfeiting. -
Annual Report
(2019)Celebrating 35 years at the service of innovation. CSEM has expanded its Deep Tech—disruptive technologies based on scientific discoveries. -
Annual Report 2016
(2016)Keen interest on the part of Swiss companies for the program launched by the CTI to compensate for the strong Swiss franc. -
Annual Report 2020
(2021-06)Business dynamics intact despite the pandemic. CSEM quickly adapted to the constraints of the COVID-19 pandemic thanks to its already... -
Annual Report 2021
(2022-06-17)CSEM can look back on 2021 as a successful year, both in commercial terms and regarding the expansion of its industrial partnerships. -
Chipless biodegradable tags, theoretical performance estimation
(2022-11-14)This paper presents a theoretical study of two chipless biodegradable tags which potentially can provide temperature, and humidity estimation, as well as identification. The influence of the substrate material, as well as ... -
Comparison of Indium Tin Oxide and Indium Tungsten Oxide as Transparent Conductive Substrates for WO3-Based Electrochromic Devices
(2017)We compare two different transparent conducting oxides (TCO), namely indium tin oxide (ITO) and indium tungsten oxide (IWO), as substrates for the preparation of electrochromically active tungsten oxide (WO3) thin films ... -
Efficient Through-Waveguide Wireless Power Transfer for Body Area Networks
(2017-10-04)This paper focuses on a solution for wireless powering of sensor nodes embedded in an artificial “skin”, used to provide a sense of touch to persons using prosthetic limbs. The artificial “skin”, that consists of an inner ... -
Efficient, Compact 868MHz Antenna for Retrofit of Electronic Appliance
(2019-09-05)This paper describes a wire loop antenna with a parasitic element, designed for use in smart smoke detector, acting as a wireless gateway. The antenna has been designed, prototyped and tuned to 868MHz band, then it was ... -
Enhanced piezoelectric properties of c-axis textured aluminium scandium nitride thin films with high scandium content: influence of intrinsic stress and sputtering parameters
(2017)Aluminium scandium nitride (ASN) exhibits a largely enhanced piezoelectric response as compared to aluminium nitride (AlN), which makes it an upcoming piezoelectric material for use in next generation RF filters, sensors, ... -
Enhanced Second-Harmonic Generation from Sequential Capillarity-Assisted Particle Assembly of Hybrid Nanodimers
(2017)We show enhanced second-harmonic generation (SHG) from a hybrid metal dielectric nanodimer consisting of an inorganic perovskite nano particle of barium titanate (BaTiO3) coupled to a metallic gold (Au) nanoparticle. BaTiO3 ... -
Enhancing elastic stress relaxation in SiGe/Si heterostructures by Si pillar necking
(2016)We demonstrate that the elastic stress relaxation mechanism in micrometre-sized, highly mismatched heterostructures may be enhanced by employing patterned substrates in the form of necked pillars, resulting in a significant ... -
Experimental characterization of the opposition surge in fine-grained water-ice and high albedo ice analogs
(2016)We measured the bidirectional reflectance in the VIS-NIR spectral range of different surfaces prepared from small-grained spherical water-ice particles over a wide range of incidence and emission geometries, including ... -
Exploring the Impact of QR Codes in Authentication Protection: A Study Based on PMT and TPB
(2017)The fast growing usage of mobile devices to access services over telecommunication networks urges researchers to look for an efficient way to secure users'' online credentials. Rooted in online users'' fear appeals, this ...